ds30921 rev. 5 - 2 1 of 4 www.diodes.com dzt2907a ? diodes incorporated dzt2907a pnp surface moun t transistor features new product ? epitaxial planar die construction ? complementary npn type available (dzt2222a) ? ideally suited for automated assembly processes ? ideal for medium power amplification and switching ? lead free by design/rohs compliant (note 1) ? "green" device (note 2) mechanical data ? case: sot-223 ? case material: molded plastic, "green" molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020c ? terminals: finish - matte ti n annealed over copper leadframe (lead free plating). solderable per mil-std-202, method 208 ? marking & type code information: see page 4 ? ordering information: see page 4 ? weight: 0.115 grams (approximate) 2 3 4 1 sot-223 4 3 2 1 c c b e 3 1 2,4 base collector emitte r top view schematic and pin configuration maximum ratings @t a = 25c unless otherwise specified characteristic symbol value unit collector-base voltage v cbo -60 v collector-emitter voltage v ceo -60 v emitter-base voltage v ebo -5 v collector continuous current (note 3) i c -600 ma peak collector current i cm -800 ma thermal characteristics characteristic symbol value unit 1000 (note 3) power dissipation @ t a = 25c p d 1500 (note 4) mw power derating factor above 25 c (note 4) p der 12 mw/ c operating and storage temperature range t j , t stg -55 to +150 c thermal resistance, junction to ambient air @ t a = 25c (note 4) r ja 83.3 c/w notes: 1. no purposefully added lead. 2. diodes inc.'s "green" policy can be found on our website at http://www.diodes.com /products/lead_free/index.php. 3. device mounted on 2? x 2? fr-4 pc board, 2 oz. copper, single sided, pad layout as shown on page 4, or on diodes inc. sug gested pad layout document ap02001, which can be found on our website at http://www.d iodes.com/datasheets/ap02001.pdf. 4. device mounted on fr-4 pcb, 7cm 2 of copper pad area.
ds30921 rev. 5 - 2 2 of 4 www.diodes.com dzt2907a ? diodes incorporated electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min max unit test conditions off characteristics (note 5) ? -0.01 v cb = -50v, i e = 0 collector-base cutoff current i cbo ? -10 a v cb = -50v, i e = 0, t a = 150 c collector cutoff current i cex ? -50 na v ce = -30v, v eb(off) = -0.5v base cutoff current i bl ? -50 na v ce = -30v, v eb(off) = -0.5v collector-base breakdown voltage v (br)cbo -60 ? v i c = -10 a, i e = 0 collector-emitter breakdown voltage v (br)ceo -60 ? v i c = -10 ma, i b = 0 emitter-base breakdown voltage v (br)ebo -5 ? v i e = -10 a, i c = 0 on characteristics (note 5) ? -0.4 v i c = -150ma, i b = -15ma collector-emitter saturation voltage v ce(sat) ? -1.6 v i c = -500ma, i b = -50ma 75 ? ? v ce = -10v, i c = -100 a 100 ? ? v ce = -10v, i c = -1ma 100 ? ? v ce = -10v, i c = -10ma 100 300 ? v ce = -10v, i c = -150ma dc current gain h fe 50 ? ? v ce = -10v, i c = -500ma ? -1.3 v i c = -150ma, i b = -15ma base-emitter saturation voltage v be(sat) ? -2.6 v i c = -500ma, i b = -50ma small signal characteristics current gain-bandwidth product f t 200 ? mhz v ce = -20v, i c = -50ma, f = 100mhz output capacitance c obo ? 8 pf v cb = -10v, i e = 0a, f =1mhz input capacitance c ibo ? 30 pf v eb = -2v, i c = 0a, f =1mhz switching characteristics turn-on time t on ? 45 ns delay time t d ? 10 ns rise time t r ? 40 ns v cc = -30v, i c = -150ma, i b1 = -15ma turn-off time t off ? 100 ns storage time t s ? 80 ns fall time t f ? 30 ns v cc = -6v, i c = -150ma, i b1 = i b2 = -15ma new product notes: 5. pulse test: pulse width, tp<300 us, duty cycle, d< =0.02 typical characteristics @t a = 25c unless otherwise specified 0 0.4 0.2 0.6 0.8 1.0 0 25 50 75 100 125 150 p , p o w e r di s s i p a ti o n (mw) d t , ambient temperature (c) fig. 1 power dissipation vs. ambient temperature (note 3) a -i , collector current (a) c -v , collector emitter voltage (v) fig. 2 typical collector current as a function of collector emitter voltage ce 0
ds30921 rev. 5 - 2 3 of 4 www.diodes.com dzt2907a ? diodes incorporated h , dc current gain fe -i , collector current (a) fig. 3 typical dc current gain vs. collector current c -v , collector-emitter saturation voltage (v) ce(sat) -i , collector current (ma) fig. 4 typical collector-emitter saturation voltage vs. collector current c 0 0.2 0.4 1 1.2 0.8 0.6 110 0.1 100 1000 -i , collector current (ma) fig. 5 typical base-emitter turn-on voltage vs. collector current c -v , b a s e - e m i t t e r t u r n- o n v o l t a g e (v) be(on) -v , base-emitter saturation voltage (v) be(sat) -i , collector current (ma) fig. 6 typical base-emitter saturation voltage vs. collector current c 1 10 0.1 100 1000 0 0.2 0.4 1 1.2 0.8 0.6 i/i = 10 cb 0 5 10 15 20 35 30 25 0.1 11 0 capacitance (pf) v , reverse voltage (v) fig. 7 typical capacitance characteristics r new product 1 0 0 0 50 100 150 200 500 450 400 350 300 250 04 0 60 80 20 100 f, g a i n b a n dwid t h p r o d u c t ( m h z) t -i , collector current (ma) fig. 8 typical gain-bandwidth product vs. collector current c
ds30921 rev. 5 - 2 4 of 4 www.diodes.com dzt2907a ? diodes incorporated ordering information (note 6) device packaging shipping DZT2907A-13 sot-223 2500/tape & reel new product notes: 6. for packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. marking information k2f y w w (top view) = manufacturer?s code marking k2f = product type marking code yww = date code marking y = last digit of year ex: 7 = 2007 ww = week code 01 - 52 package outline dimensions suggested pad layout: (based on ipc-sm-782) important notice diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to any product herein. diodes incorporat ed does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its paten t rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes inco rporated and all the companies whose products ar e represented on our website, harmless against all damages. life support diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the president of diodes incorporated. sot-223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e ? ? 4.60 e1 ? ? 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm (unit:mm)
|
